Pro-Line Performance Transmission for Traxxas Slash/Stampede 2WD/Rustler/Bandit 6092-00
Out of stock
PRO-LINE RACING PERFORMANCE TRANSMISSION, 6092-00
This is a Pre-Built Performance Transmission for the Pro-Line PRO-2 SC truck , Slash 2WD, Electric Stampede 2WD, Electric Rustler and Bandit. The 2WD Slash is one of the most important and successful vehicles in the History of RC because it brought affordable scale realism to the masses. Since its release, racers have been modifying and hopping up every aspect of the vehicle to improve its performance but they have always been stuck with the heavy, non-adjustable and non-racing inspired transmission… until now! After over a year of design, development and testing, Pro-Line is proud to release the Performance Transmission, which has been specifically designed to bring your Slash up to racing specifications. Every feature you would expect to find in a high-end race transmission is now available for your Slash. This new Performance Transmission is also a great addition to your Electric Stampede 2WD, Electric Rustler and Bandit and is a direct replacement for the Transmission included with the Pro-Line PRO-2 SC truck!
Pre-Assembled – Install and Go!
Transmissions are complicated and have a lot of moving parts. Pro-Line has done the work for you and pre-assembled the transmission to get you to the track faster! All you have to do is Install and Go! The Sealed, Oil-filled Differential has been pre-filled with 5,000 wt. diff oil and the slipper system has been pre-set for proper performance.
Sealed, Oil-Filled Gear Differential
The single biggest feature and upgrade over the stock transmission is Pro-Line’s Performance Differential. The design is based off of 1/8 Buggy style sealed differentials and is completely tunable to current track conditions by changing the weight of the diff oil. The Differential features super smooth Steel Internal Diff Gears for the ultimate in durability, and 4 O-Rings and a Diff Gasket that seals against fluid leakage. You will be amazed at how smooth the Differential is and how much it improves the performance of your vehicle.
Race Inspired Slipper System with Vented Discs
The Performance Transmission features a proven, race style Slipper Pad and plate system that is more consistent, lighter and runs truer than the stock slipper design. The Plates are Hard Anodized Aluminum with Vent Holes, which reduces heat and improves slipper consistency. Pro-Line’s 86T Spur Gear is extra wide for durability and is not offset like the stock spur gear. No more wobbly spur gears! The Clear hard plastic Gear Cover has a removable rubber cap for easy access to adjust the tension on the slipper system. Adjustments can be made with the same 7mm tool that you use to remove wheel nuts.
Lightweight Transmission and Gears
Pro-Line’s new Performance Transmission has 20% less rotating mass and is over 20% lighter overall than the stock transmission. This allows quicker acceleration, less work for the motor and faster lap times. The bottom Diff Case Gear is made out of super durable and lightweight high impact plastic, while the Top Gear and Idler Gear are super strong Steel.
3mm Thick Aluminum Motor Plate, Full Ball Bearings, & Other Awesome Features
There are so many other awesome features that make Pro-Line’s Performance Transmission a must have. The motor mounts to 3mm thick Aluminum Motor Plate with cooling fins and a machined P-L logo, all of which acts as a huge heat sink to keep your motor running cool. High quality Ball Bearings are used throughout the Transmission and the Differential spins on huge 10mm x 16mm x 5mm Ball Bearings for incredible load capability. The Toe Block is molded separate from the Transmission Case allowing for quicker and easier access to the Transmission when tuning the Differential Oil. The separate Toe Block also opens up the possibility for different tuning blocks (Toe Angle and Anti-Squat) to be used at some point in the future… The Hardened Steel Outdrive Shafts will accept the stock axles, as well as any aftermarket CVD’s or drive shafts that you might have for your vehicle.
Pro-Line’s Performance Transmission is the ultimate upgrade for your Slash 2WD, Electric Stampede 2WD, Electric Rustler or Bandit and is the stock replacement for the Pro-Line PRO-2 SC truck! No other company offers anything close to this type of performance upgrade for your Transmission. Transform your vehicle into a True Racing Machine – Order your Performance Transmission Today!
- Pre-Built Performance Transmission
- Bottle of Extra 5,000 wt. Diff Fluid
- Hardware Bag: Motor Screws & Washers, Bumper/Wheelie Bar mounting screws, Outdrive Shims
- Pre-Built – Ready to Install and Go!
- Transforms your Vehicle into a True Racing Machine
- Fully tunable Oil Filled Super Smooth Gear Differential
- Racing Style Slipper System with Vented Discs
- 20% less Rotating Mass than Stock
- 3mm thick Aluminum Motor Mount
- Ball Bearings used throughout
- Separate Toe Block for easy Transmission Removal
- Steel Internal Diff Gears and Top Gear
- Stock replacement part for the Pro-Line PRO-2 SC truck kit
- Fits Traxxas 1/10 Slash 2WD, Electric Stampede 2WD, Electric Rustler and Bandit, and Pro-Line PRO-2 SC (Note: Bandit requires use of a smaller pinion gear than what is included stock. Recommend an 18t or 19t pinion gear for most applications.)