Hot Racing Hardened Steel Spur Gear 50T 1.0Mod for Traxxas E-Revo 2/X-Maxx/XO-1 ERVT50M01
$29.88
Out of stock
Description
Hot Racing 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
– CNC machined hardened steel construction
– Black oxide finished
– Laser etched tooth count marking
– One (1) 50T, 1 mod steel spur gear
– Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 – Adjusting Gear Mesh)
– With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
– Overall diameter: 52.8mm
– Gear face width: 8mm
– Upgrade for factory plastic 6448 or 6448X 54T spur gear
Additional information
Weight | 3 oz |
---|---|
Part Color | |
Part Type | |
Fit Vehicle |
Reviews
There are no reviews yet.