Hot Racing Alum 90mm Big Bore Shocks for Traxxas Bandit/Stampede/Rustler/Slash TD90X06


Out of stock


Hot Racing 90mm big bore threaded body aluminum shocks for many 1/10th scale off-road vehicles using 90mm shocks. Some applications include, but are not limited to: many 1/10th scale truck and buggy front shocks; the Traxxas Bandit front, Nitro Rustler/Slash/Sport/Stampede front, Rustler front, Slash 2WD front, Slash 4×4 front, Stampede 2WD front, Stampede 4×4 front; and and other similar vehicles


– CNC machined 6061-T6 billet aluminum shock bodies, collars, caps, and spring retainers
– “Big Bore” threaded shock bodies
– CNC machined 11mm Delrin pistons
– 3.5mm stainless steel shock shafts
– Silver and blue anodized aluminum components
– Vented shock caps with bladder seals for consistent rebound dampening
– Threaded shock collars with o-rings to prevent unwanted movement
– Composite plastic lower shock ends with aluminum balls
– Fully assembled, just add shock oil and bleed


– Two (2) assembled shocks
– Two (2) M3x20mm flat head cap screws
– Two (2) M3x18mm button head cap screws
– Two (2) 3mm countersunk washers
– Two (2) 5.9 hollow balls
– Four (4) 1.5mm thick spacers
– Four (4) 3mm thick spacers


– Silicone shock oil of modeler’s choice and bleeding per the typical bladder shock bleeding procedure
– Best used with Team Associated shock Green Slime grease or shock o-ring grease when rebuilding lower seal
– Snap ring pliers when rebuilding lower seal


– Replaces Traxxas Big Bore Long Shocks: TRA2660, 3760, 3760A, 4760
– Extended length: 90mm
– Overall length: 100mm
– Spring: ~5.8lb/in, 1.54mm wire, 10 turn dual rate, 19.3mm OD


– Use spacers as need for installation
– Can be used with optional Hot Racing springs: SLF48FS261 (progressive), SLF48MR268 (linear), SLF48RS286 (progressive)
– See Hot Racing TD90PC06 for progressive damping 90mm shocks
– Accepts optional Hot Racing silicone shock boot RDP34201
– Replacement parts are Hot Racing: RTDS90X (shock shafts and pistons), RTD910BN (shock ends), RTD910RB (pistons and o-rings), RTD1010X (bladders and lower seals)

Additional information

Weight3 oz
Part Color

Part Type

Fit Vehicle

, , , , , , , ,


There are no reviews yet.

Be the first to review “Hot Racing Alum 90mm Big Bore Shocks for Traxxas Bandit/Stampede/Rustler/Slash TD90X06”

Your email address will not be published. Required fields are marked *